CRAYV founder Tony Jovevski holding Citrus electrolytes after training
Tips

How to Use Electrolyte Powder and Get the Mix Right

If you’ve ever tipped a scoop into a bottle and thought, That tastes a bit strong, check how much water you used. The amount of powder determines how much sodium you put in the bottle. The amount of water determines how concentrated the drink is.

Here’s how to mix CRAYV Electrolyte Hydration + Minerals for lighter use, hard training and hot days.

How much electrolyte powder should you use?

CRAYV serve Powder Water Sodium per mixed bottle
Everyday Approximately ½ scoop (3 g) 300–500 mL 513 mg
Performance or hot days Approximately 1 scoop (6 g) 400–800 mL 1,026 mg

These mixing directions apply to CRAYV Citrus and Pineapple. If you use another brand, check its label. Scoop sizes and sodium amounts vary between products.

How to mix electrolytes in a 500 mL or 750 mL bottle

  1. Add cold water to your bottle. A 500 mL bottle fits either CRAYV serve. A 750 mL bottle suits a more diluted full serve.
  2. Add the amount of powder you’ve chosen. Use approximately 3 g for a half serve or 6 g for a full serve.
  3. Close the lid and shake until mixed. If you prefer a milder taste next time, use more water within the range for that serve.
  4. Try your mix during training. That gives you a chance to check taste and tolerance before using it on a long ride or race day.

A full scoop in 500 mL and a full scoop in 750 mL both contain 1,026 mg sodium. The 750 mL mix is less concentrated because the same amount of sodium is spread through more water. You only consume the full 1,026 mg if you finish the bottle.

When should you choose a half scoop or a full scoop?

A half scoop is the lighter CRAYV option if you want electrolytes on a lighter training day. You can mix it into 500 mL for a milder flavour.

A full scoop provides more sodium and is designed for harder training, longer sessions or hot and humid conditions when you expect to sweat more. If you’re new to the full serve, mixing it with 750 mL gives you a milder drink than mixing it with 500 mL. How much fluid and sodium you need over the whole session depends on your sweat losses, how long you’re out and what else you’re drinking or eating.

What’s in a full CRAYV electrolyte serve?

A full 6 g serve provides 1,026 mg sodium, 210 mg potassium, 70 mg magnesium and 60 mg calcium. CRAYV is 99.9% sugar-free, so if you’re using it on a long ride or run and need carbohydrates, pack a separate fuel source. Each 180 g tub makes 30 full serves or up to 60 half serves.

Frequently asked questions

Can I mix a full scoop of CRAYV electrolytes with 500 mL of water?

Yes. A 500 mL bottle is within the recommended 400–800 mL range for a full 6 g scoop. Use a larger bottle if you prefer a milder mix.

Does adding more water reduce the sodium?

It lowers the sodium concentration, while the total sodium in the bottle stays the same. A full CRAYV scoop still provides 1,026 mg whether you mix it into 500 mL or 750 mL.

Do I need a scoop of electrolytes in every bottle on a long ride?

There’s no universal scoop-per-bottle rule. Start with a mix you’ve tested, then plan for the length of the ride, weather, refill points and the sodium you’ll get from other drinks or food. For a long event or unusually high sweat losses, an Accredited Sports Dietitian can help you tailor a plan.

Read when to use electrolytes to work out which sessions call for them.

Choose your flavour and mix it to suit your bottle. Shop Citrus · Shop Pineapple

Sources

Leave a comment

Fast free shipping

Get free shipping on orders of $100 or more

Hassle-free returns

Easy returns within 14 days of delivery.

100% secure checkout

All payments are processed securely

Customer Service

Our support team is available 24/7